This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada controller showing offline
Speedo
LV1
2020-07-16 04:03:00
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2020-07-11
Omada controller showing offline
2020-07-16 04:03:00
Model: EAP225
Hardware Version: V3
Firmware Version: EAP225(US)_V3_2.20.1 Build 20200630
We have 4 EAP225 wifi devices, which were configured using laptop. We downloaded omada software in the laptop and configured EAP225. If I shutdown the laptop everything works fine, but controller showing offline if I open in cloud and also in the mobile app. If I switch on the laptop and open the omada software it's showing online. Please let me know why it's happening.
#1
Options
11 Reply
Fae
2020-07-16 06:53:19
Posts: 3521
Helpful: 1310
Solutions: 450
Stories: 0
Registered: 2020-06-30
Re:Omada controller showing offline
2020-07-16 06:53:19
@Speedo
Hi,
Speedo wrote
We have 4 EAP225 wifi devices, which were configured using laptop. We downloaded omada software in the laptop and configured EAP225. If I shutdown the laptop everything works fine, but controller showing offline if I open in cloud and also in the mobile app. If I switch on the laptop and open the omada software it's showing online. Please let me know why it's happening.
Please kindly note that it requires the Controller to keep running so that you can access the Controller from cloud and fromOmada App.
>> Omada EAP Firmware Trial Available Here <<*Try filtering posts on each forum by Label of [Early Access]*
#2
Options
Andy_R
LV1
2020-12-30 11:43:06 - last edited 2020-12-30 11:45:16
Posts: 1
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2020-12-30
Re:Omada controller showing offline
2020-12-30 11:43:06 - last edited 2020-12-30 11:45:16
Model: 2x EAP245
The network works fine, but I don't have access to the controller. Not with my phone-app and not with the laptop over the webpagehttps://omada.tplinkcloud.com/ .
Are there a other methods?
With kind regards,
Andy
File:
omada-cloud.jpgDownload
2
2
#3
Options
a-e-i-o-u
LV1
2021-05-21 05:17:15
Posts: 2
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2021-05-21
Re:Omada controller showing offline
2021-05-21 05:17:15
@Andy_Rwe have the same issue..
1
1
#4
Options
Fae
2021-05-21 12:05:36
Posts: 3521
Helpful: 1310
Solutions: 450
Stories: 0
Registered: 2020-06-30
Re:Omada controller showing offline
2021-05-21 12:05:36
Dear@Andy_R,
Andy_R wrote
Model: 2x EAP245
The network works fine, but I don't have access to the controller. Not with my phone-app and not with the laptop over the webpagehttps://omada.tplinkcloud.com/ .
Are there a other methods?
Are you using Omada Software Controller or Omada Hardware Controller likeOC200?
Please verify if you canaccess your controller with its local IP address from the LAN network first.
>> Omada EAP Firmware Trial Available Here <<*Try filtering posts on each forum by Label of [Early Access]*
#5
Options
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2021-07-14
Re:Omada controller showing offline
2021-07-14 10:26:29
@SpeedohI
I am also facing same issue , I have two EAP-110 outdoor, Configured it through controller software , It start to work , but Now when i install the device on customer location
https://omada.tplinkcloud.com/login#controller usually showing offline , and there now one device SSID is showing tp-link with open password
Now, It's difficult to understand, How to configure it , Trying to contact many times with tp-link support, No response from there via email via call always waiting
Is anybody can help to solve the issue
#6
Options
Fae
2021-07-14 10:51:45
Posts: 3521
Helpful: 1310
Solutions: 450
Stories: 0
Registered: 2020-06-30
Re:Omada controller showing offline
2021-07-14 10:51:45
Dear@BT_RED,
BT_RED wrote
I am also facing same issue , I have two EAP-110 outdoor, Configured it through controller software , It start to work , but Now when i install the device on customer location
https://omada.tplinkcloud.com/login#controller usually showing offline, and there now one device SSID is showing tp-link with open password
Did you directly close the Controller softwarefrom the PC or disconnect the PC from the Internetafter you configured the EAPs?
To access the controller via cloud access, please ensure that the controller host is running and connected to the Internet.
Otherwise, it's normal that the controller shows offline when you try to access the controller remotely.
For your case, you may reconfigure the EAPsfor checking.
>> Omada EAP Firmware Trial Available Here <<*Try filtering posts on each forum by Label of [Early Access]*
#7
Options
BT_RED
LV1
2021-07-24 07:16:36
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2021-07-14
Re:Omada controller showing offline
2021-07-24 07:16:36
HI, I did same , I really don't know before , Controller should be on Now showing online after on the controller, But one device has gone to reset, If i am trying to change the ssid & password, Not going to change, and the 2nd device has gone reset, the ssid is showing tp link , Now i forget , How to add this to controller again please guide
#8
Options
BT_RED
LV1
2021-07-24 07:18:21
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2021-07-14
Re:Omada controller showing offline
2021-07-24 07:18:21
sorry, one device is working as i set ssid and password with that through cloud system, But where i am going to chane ssid and password with that, it is not going to change 2nd device has gone reset, i forgot , How to add this device again with controller please guide
#9
Options
Fae
2021-07-26 09:16:15
Posts: 3521
Helpful: 1310
Solutions: 450
Stories: 0
Registered: 2020-06-30
Re:Omada controller showing offline
2021-07-26 09:16:15
Dear@BT_RED,
BT_RED wrote
HI, I did same , I really don't know before , Controller should be on Now showing online after on the controller, But one device has gone to reset, If i am trying to change the ssid & password, Not going to change, and the 2nd device has gone reset, the ssid is showing tp link , Now i forget , How to add this to controller again please guide
For your case, it seemsthat the EAPs and Controller are located in different locations, in this case, the EAP device cannotcommunicate with the Controller directly, we are unable to adopt and manage the EAP devicedirectly via the Controller from cloud access.
If it's not possible totake the EAPdevices to the same LANnetwork with the controller, please refer to the following FAQ to adopt and manage the EAP devices.
How to manage Omada devices at different sites across Internet using Omada Controller
>> Omada EAP Firmware Trial Available Here <<*Try filtering posts on each forum by Label of [Early Access]*
#10
Options
BT_RED
LV1
2021-07-26 12:14:33
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2021-07-14
Re:Omada controller showing offline
2021-07-26 12:14:33
@FaeThanks for reply
Both devices are installed in same location with same network, the one device has been reset automatically and showing ssid tp link , going to connect directly with open password
2nd device is showing the ssid as i created it through omada controller, but when i am going to change their ssid and password, it is not going to change that means, AP is not going to communicate with omada controller, But in controller the one AP is showing online
Anyways,It was difficult for me to manage AP through omada. So now I configured it through direclty access with IP 192.168.0.254 , Nowit's working fine without omada
But My question is that, Ap has been configured through cloud system, We can manage the AP from any other network or not?
#11
Options
1
2